Junk Gypsy™ Paint is an American-made chalk and clay paint that is perfect for painting and re purposing your junk finds. It will adhere to almost any surface, including wood, metal, ceramic, stone, and more. It is fast-drying and provides an easy clean up so you can gypsy-fy™ your piece quickly, turning it into treasured junk.

–How do I care for my finished gypsy-fide painted furniture?
Dusting with a soft dry or damp cloth is acceptable. Avoid scrubby sponges as they could scratch your finish. The Clear Coat is water and chemical resistant.

–What is the shelf life of the products?
The paint and Clear Coat have a shelf life of one year but will last a lot longer if stored in a cool dry place.

–There are currently only 16 colors in the line, can they be mixed for more shades?
Yes! Although the Junk Gypsy style is known for bright, funky colors, it is easy to mix many lighter shades of each color by adding Dreamcatcher or Buttermilk Biscuit. Just remember to mix enough to finish your project or be sure to measure the amounts added together.

–Do I need to sand or prime?
In most cases, you will not need to sand or prime your junk find. However, if you are painting a piece with a previously glossy finish, for best adhesion, light sanding would be recommended. If you have a piece that is particularly damaged and you desire a smooth finish, then priming is recommended. Review all warnings on the label before sanding possible lead paint.

–How do I prep my piece before painting?
It is always important to clean your piece properly. When junking, we are finding furniture that has a past life and may have been abused or left alone for many years. Remove all the dust and debris, and any loose paint. Wash your piece thoroughly with warm soapy water, a degreasing solution or a 50/50 water and vinegar mix. Allow to dry before painting.

–How is this different than latex paint?
Latex paint is made of synthetic materials and Junk Gypsy Paints are made up of chalk and clay. The paint also distresses easily for a vintage look.

–How many coats of Clear Coat should I apply? Do I always need a finish coat?
Yes, your paint should be protected as it is a matte finish. Apply 2 coats of Clear Coat to a completely dry painted piece. For an ultra-smooth finish, buff between coats with a super fine grit sandpaper.

–How long does it take to dry? How long should I wait before applying a second coat?
It depends on the weather, but mostly the paint will dry within a few hours, and sometimes much quicker. When it is dry to the touch, it is safe to apply a second coat.

–What kind of brush should I use for the paint?
Brushes are a personal preference, but if you are looking for a smoother finish a synthetic brush is best and if you would like more texture, use a natural bristle brush. If brush strokes occur and are not desired, you can always lightly sand with fine grit sandpaper.

–Can I distress the paint for a more vintage look?
Yes! Layer different colors together and sand lightly to reveal each desired layer. Since most of us are finding junk to transform, it is difficult to know what you will be covering and how the paint will respond, so using a medium to fine grit sandpaper is best to avoid removing too much paint.

Showing 1–12 of 18 results